Skip to content

Get the device

Step 1 of 5 · about 5 minutes

Glance Box runs on one specific display. Check these three things before you start.

What to buy

  1. A GeekMagic SmallTV Ultra. It is a small cube with a 240×240 screen and an ESP8266 inside, sold for around 15 €.

    Only the Ultra

    Other models, including the SmallTV Pro, use different hardware. Glance Box does not support them, and flashing them will not work.

  2. A USB power supply and a matching cable. A phone charger works.

What else you need

  1. A computer that is always on in your home network for the server: a home server, a NAS or a PC (a Raspberry Pi 4/5 should work too, but is not tested yet). It needs Docker with Docker Compose.
  2. A 2.4 GHz Wi-Fi network. The display cannot use 5 GHz.
  3. A browser on a phone or computer in the same network.

Before you flash

Flashing is a one-way street, unless you make a backup

The stock firmware is bound to your device and there is no public image to go back to. You can keep a backup of the stock firmware, but that needs a USB serial adapter and clip leads. Most people skip it. Details: Flashing details & backup.

Next you start the server, so the display has something to show as soon as it is flashed.